Installing your Digital Adapter

You are moments away from enjoying crisp, clear digital picture and sound on all your TVs. To install and activate your Digital Adapters, please review the following steps:

Installing your Standard Definition Digital Adapter

  1. Turn off your TV and disconnect the incoming cable from your TV.
  2. Connect the cable to your new DA and set the switch on the back of the DA to Channel 3.
  3. Connect the white cable to your new DA.
  4. Connect the white cable to your TV.
  5. Connect the power supply cord to your new DA and plug it into your wall outlet.
  6. You’re now ready to activate your DA!
    • Turn on your TV and tune to channel 3.
    • Messages will be displayed on the screen. Once you see them, you’ll know you have correctly connected your DA.
    • If you are installing multiple DAs, please connect ALL of them before proceeding with the next step.
  7. Go online to ArmstrongOneWire.com/Activate or call 1.855.511.0158 to activate your DA(s).

Programming Your Remote:

Your remote control is already programmed to control your Digital Adapter. To use it to also control your TV set, follow the easy to use instructions in the User’s Guide, provided with each remote.

To place your DA out of sight, use the supplied Remote Eye to receive signals from the remote control.

Installing your High Definition Digital Adapter

  1. Turn off your TV and disconnect the incoming cable from your TV.
  2. Connect the cable to your new DA.
  3. Connect the HDMI cable to your new DA.
  4. Connect the HDMI cable to your TV.
  5. Connect the power supply cord to your new DA and plug it into your wall outlet.
  6. You’re now ready to activate your DA!
    • Turn on your TV. Using your TV’s remote, push the input button and select HDMI.
    • Messages will be displayed on the screen. Once you see them, you’ll know you have correctly connected your DA.
    • If you are installing multiple DAs, please connect ALL of them before proceeding with the next step.
  7. Go online to ArmstrongOneWire.com/Activate or call 1.855.511.0158 to activate your DA(s).

Programming Your Remote:

Your remote control is already programmed to control your Digital Adapter. To use it to also control your TV set, follow the easy-to-use instructions in the User’s Guide, provided with each remote.